PCI Express Data Highway Plus / Remote I/O Adapter
DESCRIPTION:
The DL-PCIe (CIF50e-DHPRIO) connects your PC's and MMI's via the Plug and Play PCI Express bus using existing AB DF1 Com Port drivers to A-B's DH+/DH-485. It is a lower cost alternative to A-B's 1784-PKTX card and SST's 5136-SD-PCI. The DH+ / RI/O Adapter / DH-485 Card is a PCI card to access AB's DH+ and RI/O networks. The Interface Card allows existing
1770-KF2, and PLC CH0 Serial DF1 drivers to run at the PC's PCI bus speed. This will allow MMI,
HMI, SCADA equipment, and other computer applications access to any DH+ node including PLC's and
SLC's.
All settings are accomplished using an easy to use Windows based Configuration Program over the bus
or by using an external RS-232 connection to another computer.
Data Highway Plus (CIF50-DHPRIO)
Speeds: 57.6, 115.2, and 230.4 Kbaud
Configurable DH+ address (0 to 77o)
Remote I/O (RI/O)
Speeds: 57.6 K, 115.2 K, and 230.4 Kbaud
Occupy 1 to 7 virtual adapter Racks
128 bits of throughput data per rack
Up to 16 Block Transfer Reads and Writes per rack
DH-485 (CIF50e-DH485)
Speeds: 4800, 9600 Baud, and 19.2 Kbaud
Configurable DH-485+ address (0 to 31 decimal)
SPECIFICATIONS:
Operating Environment: 32 to 122 °F (0 to 50 °C)
Storage: -40 to 185°F (-40 to 85°C)
Humidity: 5% to 95% non-condensing
Power: PCI Express Bus 5V - 1.5 watts
DF1: Full Duplex (Point to Point) and Half Duplex (Multidrop)