|
Serial Interface |
|
DH-485 |
Isolated DH-485. Speeds of 4800, 9600 and 19.2K
(default) |
|
RS232 Configuration port |
DB9 - DTE (male) - 19200,N,8,1 and XON/XOFF
flow control. |
|
Network Interface |
|
Interface |
Ethernet 10Base-T or 100Base-TX (Auto-Sensing) |
|
Connector |
RJ45 |
|
Protocols |
Modbus TCP, Telnet |
|
Modbus TCP Connections |
Up to 8 simultaneous Modbus TCP connections are
supported |
|
Power |
|
Input Voltage |
9-27V DC – 3.0 Watts |
|
Environmental |
|
Operating Temp |
32 to 122 °F (0 to 50 °C) |
|
Storage Temp |
-40 to 185°F (-40 to 85°C) |
|
Humidity |
5% to 95% non-condensing |
|
Phsyical |
|
Dimensions |
1.2" H x 4.75" D x 3.2" W (30.4 x 120.7 x 81.3 mm) |
|
Weight |
0.56 Lbs (0.2 Kg) |
|
Indicators (LED) |
- CHA A-B Network Status
- CHB Ethernet Activity (TX/RX).
- CHC DL6000 Operating Mode and Status
- Ethernet Activity (Port TX/RX) On the right side of the RJ45
- 10/100 Base-T Ethernet Link Status On the left side of the RJ45
|
|
Pushbuttons |
RESET pushbutton (left side), Configure pushbutton
(right side). |
|
Included Software |
|
MS Windows® DeviceInstaller - used to assign
IP address and update firmware
MS Windows® CommPort Redirector
- virtual COM Port software
MS Windows® EQ32 Configuration -
used to map Modicon registers/coils to Allan-Bradley data files
within the PKV6000 |
